How to: Jasmine Candle using SoyaLuna Container Wax

Our elegant Jasmine Fragrance Oil is a beautiful addition to our candle making recipe, with floral aromas to freshen your home. It offers a scent throw of light undertones of bitter orange and Madagascar vanilla with an aftertaste of honey and musk notes. Want to learn how to make a candle with this gorgeous fragrance oil? Follow our guide on how to make Jasmine Candle using SoyaLuna Container Wax.

SoyaLuna Container wax is great for the home candle maker, suited to making container candles. It’s our newest wax to be launched at Cosy Owl and has great qualities including zero to low frosting, smooth finish, great hot and cold throw and we recommend using a 6-8% fragrance load.

Want to have a go at making a candle? Let’s show you the steps to making your own in a glass container.

You will need:


1. Measure and melt the wax

First, weigh 160g of Soyaluna wax ready for making 1 x 20cl glass candle. Soyaluna is a white, soy blend wax and comes in a pellet form, which makes it easy to melt. Pour the wax into a bain marie or double boiler and gently heat the wax to 85c to ensure it is fully melted. Stir the wax to ensure an even spread of heat and try not to heat the wax above 90c as this could damage the natural wax. You can keep an eye on the temperature by using a thermometer. 

2. Preparing containers

While waiting for the wax to melt, clean the glass container and warm it up to around 35c. You could use a heat gun for this or add the glass to a tray of warm water to heat it. This will assist later on when the candle is curing to improve glass adhesion and help to avoid frosting. It is important to make sure no water gets into the wax or glass as this can affect the curing of the candle. 

Once heated you can then add the wick in place, we have chosen an ECO 10 wick for this container and wax combination. Simply peel the tab from one end of the glue dot and stick to the end of the wick, then peel the other side of the dot and place it centrally into the glass. Press down to secure this in place. You can then use a wick centring tool to keep the wick upright. 

3. Weigh your fragrance or essential oil

Now it’s time to think about fragrance oil. It is common to add between 5%-10% of fragrance oil in candles. We will be adding a 6% fragrance load to the wax. This will mean 6% of the amount of wax we are using. This works out at 5.7g of fragrance oil. Measure 5g on a weighing scale to get an accurate measurement. 

4. Check the flash point of your chosen Fragrance or essential oil

Next, check the flash point of your chosen fragrance oil. The flashpoint is the temperature in which the scent will evaporate so it is important to add the oil below this temperature. Jasmine will need to be added below 95c.

5. Blend the fragrance oil into the wax

Make sure the wax is fully melted before adding any ingredients. It should appear clear and smooth. Gently pour in the fragrance oil into the wax and stir until blended and smooth. The fragrance will blend seamlessly into the wax.

6. Add your dye

Add a pinch of dye to the wax and stir slowly until fully blended into one colour.

7. Pouring the wax

At around 65c pour the wax into a jug and then pour slowly into your candle glass leaving about a 1cm gap from the top. Pouring slowly will create less air bubbles in the wax. The wax pours effortlessly and what’s great is that it will only need 1 pour. 

8. Leave the candle to set for 24 hours

Leave the candle to sit on a flat, even surface for at least 24 hours. For best results we recommend slowly cooling at room temperature and to avoid any cold surfaces or drafts. You could also use a rack to encourage cooling from the bottom of the glass.

9. Trim the wick

Now your candle has cured it’s time to trim the wick to about 5mm and get ready to fall in love with your homemade candle. As you can see the wax has set with a smooth, creamy finish. Soyaluna offers a great hot and cold scent throw allowing your chosen fragrance to naturally fill the room.

Leave a Reply

Your email address will not be published. Required fields are marked *