This mould is ideal for making a block of Christmas trees that can easily be broken down in to 6 individual melts. Please note, the mould does not come with wax.
Suggestions for making your Christmas trees melts
- Derrita la cera y déjela genial a 55°C antes de verterlo con cuidado en los moldes (si se vierte en los moldes a una temperatura más alta, los fundidos podrían dañarse y gotear) - utilice siempre una superficie plana resistente al calor (la mayoría de las superficies de las encimeras de las cocinas lo son)
- Para solo colour trees, simply pour your wax into the mould up to the max level
- If you want to combine colours (different greens perhaps), initially pour a small amount of the wax you want to be on the top surface of the tree into the cavity and allow it to set slightly – then add additional colours as required (we suggest no more than three colours per tree)
- Deje que la cera se enfríe para que borrar ver que se solidifica antes de cerrar la tapa y dejar curar hasta que se endurezca
- A pillar blend of wax is the preferred choice by most of our customers as this type of wax is harder and allows the solidified trees to be easily removed from the mould
Remember to include an appropriate natural fragrance to create the all important desired aroma. A selection of the most suitable fragrances can be found in our Navidad Aceites aromáticos o Wood Fragrance Oils listings.
Este molde es totalmente reciclable.
Reseñas
Aún no hay opiniones.